4G 1080P 22X Zoom PTZ IP Camera monitor HD PTZ camera
Applicable to vehicle, flow of large, temporary surveillance
application environment, such as investigation, Applicable to
vehicle, wireless and temporary outdoor surveillance like police,
traffic, or concerts, others.
HD IR PTZ Camera is a professional HD IR PTZ camera integrated with
H.265 encoding image quality,Dual stream output;
360 degree PTZ 22X/30X, 200 preset , auto cruising;
Built-in battery power supply(4-6 hours work) or external power
Remote view in realtime monitoring,Two way voice/intercom;
4G/WIFI transmit; multiple grade image quality transmitting option;
Support 1pcs SD card up to 256G for record storage;
3G/4G/WIFI wireless transmission;
Different installation base is suitable for different installation
GPS google map/position,with precise timing function;
The equipment cluster intercom function.
Product Technical parameters:
Video compression H.265 High Profile Compression
OSD Overlays letters,like date/time into the video. On the small
Dual Stream Record with HD video and remotely live view with lower
Audio input/output 1-ch Audio input,1-ch Audio output
Encoding Resolution 1080P,720P,D1
Image quality High,middle and low optional
Local storage 256GB double SD card max.Option for SSD expandable.
Record format ASF/FAT32
Audio encode G.726
Record strategy Default power-on record
Night vision about 60m distance
Wireless network Support 3G/4G and compatible with
GPRS,EDGE,etcbuilt-in WIFI,support hotspot.
GPS(optional) support GPS,option BD/GONASS
Horizontal speed:360°,continuous rotation:120°/S
Vertical speed:-15° -90° rotation 60°/s
Battery Built-in battery,work 6~8 hour,external power 19V/3A
Remain battery capacity 0/25%/50%/75%/100%
Installtion method Sucker installation,fixed chassis installated
Waterproof grade IP66
Size(mm) 128(W)x40(H)x135(D)mm(with bracket installation)
Weight(g) Product:4kg,with protected box:9kg
4G HD PTZ camera.
Q: What can I do when I found a problem with the product, but I can
not solve it by myself ?
A: Take note of the model and software version number, then submit a
detailed description of the problem to the technical supporting
engineers to analyze; the more detailed you have submitted, the
more convenient for us to analysize.
Q: How about when there is no video output from the vehicle host
A: 1.Check the host’s turn-on status, if only a blue light on, it
means the host is in standby status and has not been started up
yet, meanwhile check whether the host’s power cords red &
yellow cords are in power supply status or not, if only one cord is
supplying power, the device is unable to start up.
2.Check the power supply status of display screen, as well as check
whether the display video has been switched to AV status.
3 Check the connecting status between the host’s video output cable
and display screen.
4 check whether the lock status of the host’s LOCK, it must be
locked before normal starting up.
Q: How to do when the car host video input interface is different
from the camera output interface?
A: The car uses 4PIN type while camera uses BNC or aviation head
type, if not in correspondence, please use conversion head for
connection or wiring based on standard corresponding according to
the cable sequence defined by the car host.
Q: How to do when the device does not conduct video recording after
it is turned on and SD card has already been installed?
A: 1.Check whether the SD card has been formatted or not after
installation, because unformatted SD card cannot be used. Enter
System Menu - System Tools - Device Format to format the newly
installed SD card;
2. Check to see whether video channel is closed or not, whether set
a timer recording or not, it will not take video when it is not
within the video recording time period.
3.Check the SD card inserting status and whether the SD light on
front panel is on or not.
Q: The video file is missing or there is no video file within a
certain period of time, how to do?
A: 1. Determine the time period by analyzing the final video file
before missing and the first video file after recovery.
2. Confirm whether the host is not on during that period of time,
such as when the driver halfway parking, loading and unloading
goods while the host is not set by video delay.
Q: When car PTZ cannot be controlled, it cannot rotate up and down,
how to do?
A: Check whether PTZ protocols and baud rate are set correct, address
codes are corresponding or not, whether have selected to maximize
the video of the channel when control the PTZ, for example, when
control the second channel, it must maximize the screen of the
second channel image to control it.GPS-related issues
Q: GPS module exists but no coordinate information?
A: 1. Check whether GPS module exists, if it does not exist, check
whether the hardware is installed or in a good contact.
2. Make sure that the GPS antenna contacts are good, whether the
antenna is broken, it is recommended to be located in places with
strong signal, note that some car glass shielding film will block
3. If the test is in the room, the signal of GPS antenna in the
room will be obscured, it is recommended that the GPS antenna is
Q: Deviation of GPS location on map?
A: It means the signal is valid if the GPS module already positioned,
there may many reasons for the deviation, such as government
restrictions, permissible error, GPS signal interruption, etc; the
actual satellite map may have deviation for security reasons,
general map can solve the problem by using GPS correction.3G
Q: If use the 3G wireless module for dial-up, what do I need to pay
A: 1. Choose the built-in wireless module WCDMA or EVDO,
corresponding module settings are not the same, the modules
supported by different machines models are not the same, so please
make sure whether your module and SIM is in correspondence. Do not
use telecom SIM card on WCDMA machine;
2. Check whether the settings of Server IP and port are correct,
whether 3G signal is strong enough for dialing, and then check
whether the 3G dial-up is successful or not.
3. When dialing is unsuccessful, please check 3G antenna is in good
contact or not, the dial up may fail because of weak signal,
moreover, please check whether the SIM card has enough traffic, if
no traffic, dial-up will be unsuccessful.
Q: When 3G has neither report nor video , what should be done
A: Press INFO key to enter the system information page, check whether
the SIM card exists and view the signal strength as well as dial-up
status, whether the antenna is in good contact, and then check the
SIM to see whether it is out of traffic, the most basic judgment is
to replace the SIM card. If the dial up failed with signal, then
check whether the settings of center number and the port are
correct. Moreover check whether the device number of the product is
Q: 3G signal is intermittent, video is jammed?
A: At present the signal coverage of WCDMA and EVDO is rather wide,
however, there are some mountainous districts without signal
coverage, and some suburban areas have weak signal due to the local
network constraints, then it will be jammed during watching of
video, or video cannot be watched at all, the greatest impact of
this situation is from the local network; Moreover check whether
the frame rate setting of sub-stream is too high, because the video
may also occur such situation when the network is poor and frame
rate setting is high.
Q: Why the vehicle and video cannot be seen in CMSviewer client
when the device has been started?
A: At first make sure the central registration server is switched on
and on the net, then check whether the host device number has been
occupied to cause conflict, secondly check whether the settings of
server-centric IP and port are correct; devices report to the
center via the built-in 3G module or via WIFI. If via built-in 3G,
please check whether selected the correct type of built-in 3G
module, for example, WCDMA and EVDO module needs the support from
corresponding SIM card, check whether the antenna is in good
contact; If it still can not report when above all are checked,
enter into the system information page to view dial-up. If dial-up
is not successful, look up whether the setting of data access point
and center number is correct. If all ultimately fail, please
collect as much information as possible to submit to the technical
supporting staff for analysis, the more data provided, the more
convenient for technicians to solve the problem.
Q: The device is online, but why can I not see the video image?
A: Please set lower sub-stream to transmit image, the blocked or slow
transmission speed situation may occur when the sub-stream frame
rate is set very high and be affected by network uploading limit;
poor network signal or intermittent will seriously affect the video
Q: The device is properly reported on CMSviewer, but the videos
cannot be seen after using for some time?
A: Firstly check whether the host side displays dialing, if it keeps
the dialing status, it may be because the flow of the SIM card has
run out, replace the SIM card to test; Secondly query whether the
host device number has been modified by the driver, the host with
modified device number needs to be resubmitted to add vehicle
information; Thirdly, if it still does not work by changing the
card, it will need to check whether the host’s 3G module fails.